Category Archives: Fluid Sealing News

FSA to Offer Short Courses at the Fugitive Emissions Summit

The Fluid Sealing Association will be offering two short courses at the Fugitive Emissions Summit on June 13, 2016, at the George R. Brown Convention Center in Houston, Texas.

The first course on “Valve Installation” will focus on identifying best practices in regards to valve packing installation as outlined by the FSA. The best valve packing installed incorrectly will not ensure compliance to LDAR requirements. It is imperative that a plant have a serious, focused approach to this important subject.

The second course on “Flange Sealing Installation” will focus on the FSA’s best practices for successful flange sealing, including gasket sealing stresses, torque calculations, and gasket selection.

For more information, click here.

White House to Host Water Summit on Building a Sustainable Water Future in the United States

A message from Mike Shorts, President of the FSA:

The White House today announced that it will host a water summit on building a sustainable water future in the United States. Their goal is to raise awareness of the national importance of water, and the highlight new commitments and announcements that the Administration and non-federal institutions are making to build a sustainable water future.
Given the important role sealing devices play in preventing leaks and improving the efficient use of water in the Worlds process industries, the FSA and its members are committed to doing its part in building a sustainable water future. The FSA is well equipped to work with our partners in the process industries, in finding solutions and being a technical resource to improve and ultimately reduce water usage.
Member companies of the FSA offer American-made, cost-effective and proven solutions and we develop sealing technologies that drive water usage reductions across the U.S. process industries.
The Fluid Sealing Association is a trade association focused on promoting a safe, clean environment for society and a safe work places for employees. Member companies are involved in the production and marketing of a wide range of fluid and air sealing devices primarily targeted at the energy and industrial process markets. We support the development of related standards and provide education in the fluid sealing area.

The Fluid Sealing Association (FSA) Responds to the White House Announcement on Reducing Emissions

The White House today announced that it will seek to limit methane emissions from existing sources in the oil and gas industry through forging a relationship with Canada to implement the historic Paris Agreement by developing mutual environmental control regulations. As the leading trade association for American and Canadian sealing device manufacturers, the Fluid Sealing Association (FSA) recognizes the importance of addressing these challenges and believes sealing and containment device technologies can play an important role. Cost-effective, American and Canadian made sealing device technologies are a proven solution to limiting methane emissions from the oil and gas sector. The sealing industry looks forward to working with the oil and gas industry to address this issue.

The FSA and its members are committed to being a technical resource in addressing these issues. FSA members welcome the opportunity to work with industry to drive emissions reductions in a positive way.

Click here to read the announcement from the White House.

Founded in 1933, the FLUID SEALING ASSOCIATION® (FSA) is an international trade association focused on promoting a safe, clean environment for society and safe workplaces for employees. Member companies are involved in the production and marketing of a wide range of fluid and air sealing devices primarily targeted at the energy and industrial process markets. They support the development of related standards and provide education in the fluid sealing area.

For further information, visit their web site at www.fluidsealing.com. Also, be sure to look for the FSA on LinkedIn, Facebook, Twitter, YouTube, and Google+.

FSA Offers Webinar on Low E Valve Sealing Regulations

The Fluid Sealing Association® (FSA) will be presenting a webinar on Monday, January 25, 2016 at 2:00 PM EST on “Low E Valve Sealing: How will the new regulations affect your plant?” The cost of this webinar is $50 and the course will be eligible for PDH credits (2 hours).

Right now in North America, major regulatory changes are happening in regard to sealing valves in Low Emissions service. This webinar will be discussing the regulations and the challenges industry is facing to curb methane and fugitive emissions including an insight into the new EPA methane rules.

The FSA is proud to offer this 1.5 hour webinar that will give solid information about the coming wave of changes to meet regulatory requirements for valve sealing. Valves are recognized as one of the primary sources of emissions leakage and this webinar will focus on the relationship between valve and valve packing and the adoption of best available technologies and correct installation practices.

The speakers will be Phil Mahoney, Vice President of the Fluid Sealing Association, and Ron Frisard, Vice Chair of the Compression Packing Division of the Fluid Sealing Association.

To register, click here.

Pump Engineer Interviews Henri Azibert, FSA Technical Director

The October 2015 issue of Pump Engineer features an interview with Henri Azibert, the Technical Director for the Fluid Sealing Association (FSA).

Pump Engineer:  What is your background and how did you first become involved in the FSA?

Henri Azibert: I worked for one company for many years. I worked for Chesterton where I was involved with their mechanical seal product lines and then their mechanical packing product lines in the engineering group for three decades. While there, I ended up being the representative for the company at the FSA. Then, I started to work at the different levels, on the different committees, and held various positions.

I’ve also been involved in several other organizations and committees, including American Petroleum Institute (API), where I was on a task force on mechanical seals for the API 682 standard.  I’ve also been involved with the Hydraulic Institute (HI), I’ve been on the advisory committee for the Pump Symposium and then, of course, the FSA. And because the FSA is closely tied with the European Sealing Association (ESA), I’ve been involved in a number of joint projects there as well.

Click here to read the entire interview.

Global Business Calls for Substantial Progress on a WTO Environmental Goods Agreement by Nairobi Ministerial Conference

This week in Geneva, global industry released a letter urging negotiators to make substantial progress towards an ambitious Environmental Goods Agreement outcome by the 10th Ministerial Conference of the WTO in Nairobi.

December 1, 2015

An open letter to WTO negotiators:

On behalf of associations representing business from around the world, we urge governments to
conclude an ambitious Environmental Goods Agreement (EGA) that will eliminate tariffs on a
broad range of environmental goods and technologies under the umbrella of the World Trade
Organization (WTO).

Industries across the globe strongly endorse efforts to negotiate an EGA that is commercially
significant, negotiated in a timely fashion, implementable and adequately flexible to accommodate
and adjust to innovation.
To this end, we call on negotiators

Click here to read the entire letter.

 

WTO Negotiates a Tariff-free Trade Agreement to Protect the Environment and Sealing Device Industry

WTO Photo 1Representatives of the Fluid Sealing Association and the European Sealing Association are leading efforts to create a new market access platform for sealing device technology with the World Trade Organization’s “Environmental Goods” Trade Agreement.

Seventeen trade negotiating teams from the World Trade Organization (WTO) are crafting a deal that will make selling “environmental goods” tariff-free for each participating country. The negotiations, which have been taking place in Geneva, Switzerland for the past year are looking to support or oppose as many as 650 products for the Environmental Goods Agreement (EGA). With only three rounds of negotiations remaining, participating countries are hoping to reach an agreement in December, 2015.

Solar panels, wind turbines, soot removers, desalination equipment, composting systems and water quality monitors are pretty much a given for the EGA. Representatives of the sealing device industry are working to ensure mechanical seals, gaskets, packing and expansion joints are also included in the final package.

“Among others, we have taken the sealing device technology story to China, South Korea, Japan, Australia, Canada, Costa Rica, Hong Kong, New Zealand, Norway, Singapore, Switzerland, Taipei, the European Union and its 28 member states. We were afforded the opportunity to present to all participating trade delegations in Geneva in March” said Chris Swonger, Chair of the Fluid Sealing Association Government Affairs Working Group and Senior Vice President, Global Government Relations for Smiths/John Crane.

Click here to read more.

2015 Chem Show Celebrates 100 Years of Success

The FSA is an Endorsing Association of the 2015 Chem Show (November 17-19, 2015).  

In 1915, International Exposition Company’s inaugural Chem Show in New York City aimed to stimulate pharmaceutical, dye and organic chemical manufacturing in the United States.

Over the last 100 years, the exposition’s focus has shifted toward showcasing the industry’s best practices and latest technological advances, while providing a valuable learning experience for all participants. Next month, show attendees will have another unique opportunity to visit hundreds of exhibits and attend seminars that will highlight the newest trends, products and methods of production in the chemical processing industry (CPI).

Providing a comprehensive offering, the majority of this year’s exhibitors (approximately 75 percent) are those responsible for manufacturing the equipment and developing the technology that make today’s CPI methods a reality.  According to show management, exhibitions well-align with the Chem Show’s aim to provide key insight into how to accomplish more in less time and with fewer resources, while immersing attendees in hands-on exposure to the latest trends and technological advancements.

Click here to read more.

Click here for more information on the Chem Show.

FSA Appoints New Members to Board of Directors

(October 15, 2015) – The Fluid Sealing Association (FSA) is pleased to announce the appointment of Jeff Bernthisel, General Sales Manager at EGC Enterprises, Inc., Chardon, OH, and Carl Jones, Packing Market Specialist at  W. L. Gore & Associates, Inc., Coraopolis, PA, to its Board of Directors.

“We are excited to be able to add Jeff and Carl as members to our board,” said Mike Shorts, FSA President. “Their extensive industry knowledge and great leadership capabilities will add to our existing bench strength and I am very much looking forward to seeing their positive impact on the association.”

Both Jeff and Carl are long standing members of the FSA and currently take leadership roles in many of the association’s technical committees and divisions.

Founded in 1933, the FLUID SEALING ASSOCIATION® (FSA) is an international trade association. Member companies are involved in the production and marketing of a wide range of fluid sealing devices primarily targeted to the industrial market. FSA membership includes companies in Europe and Central and South America, but is most heavily concentrated in North America. FSA members account for a majority of the manufacturing capacity for fluid sealing devices in the Americas market.

Follow us at www.fluidsealing.com | @fluidsealing

EGC Enterprises, Inc. is a recognized world leader in the engineering and manufacturing of graphite and graphite composites for high temperature applications in fluid sealing or thermal systems management.

Follow them at www.egcflexiblegraphitesolutions.com | @EGCEnterprises

W. L. Gore & Associates, Inc. is a technology-driven company focused on discovery and product innovation. Well known for waterproof, breathable GORE-TEX® fabric, the company’s portfolio includes everything from high-performance fabrics and implantable medical devices to industrial manufacturing components and aerospace electronics. Founded in 1958 and headquartered in Newark, Del., Gore is one of a select few companies to appear on all of the U.S. “100 Best Companies to Work For” lists since the rankings debuted in 1984. The company also appears regularly on similar lists around the world.

Follow them at www.gore.com

Charli K. Matthews Appointed as Public Relations Manager for the FSA

(October 13, 2015) – The Fluid Sealing Association (FSA) is pleased to announce the appointment of Charli K. Matthews, Founder and President of Empowering Pumps, LLC, in Tuscaloosa, Alabama, to their newly created Public Relations Manager position.

This position was created to help craft the public voice of the FSA as it continues to take a position as the leading trade association that is recognized and accepted as a Subject matter expert and technical leader that advocates and influences environmental compliance to create and raise standards in technology, safety, quality, and best practices for sealing devices and associated products. And one that Educates in the correct adoption of technology and practices and is a key collaborator with organizations that influence and direct the development of key standards that directly impact the users of sealing devices.

“Public Relations is a strategic communication process that builds mutually beneficial relationships between an organization, its partners, and the public. So it is my role as Public Relations Manager to help craft our public voice and spread information between the FSA, its targeted audiences, as well as into the public area,” said Charli K. Matthews.

“This new role is key to the continued growth and recognition of the FSA in the public arena and we are excited that Charli agreed to take on the responsibility. This is especially important in light of the support and advocacy being provided by the FSA and its member companies with regards to the significant amount of activity that is occurring in the regulatory space at this time. Ensuring our public message is clear and concise is extremely important for the FSA,” said Mike Shorts, FSA President.

In addition to this new role, Charli has been responsible for developing the FSA’s social media presence, and was the driving force behind the development and redesign of the FSA’s new website.  She was responsible for the expansion of the website’s content and making it a more valuable resource for the industry, as well as improving the ease of use for the FSA’s members’ customers. In 2015, Charli was recognized by the FSA with the awarding of their prestigious Award of Merit.

Founded in 1933, the FLUID SEALING ASSOCIATION® (FSA) is an international trade association. Member companies are involved in the production and marketing of a wide range of fluid sealing devices primarily targeted to the industrial market. FSA membership includes companies in Europe and Central and South America, but is most heavily concentrated in North America. FSA members account for a majority of the manufacturing capacity for fluid sealing devices in the Americas market.

Follow us at www.fluidsealing.com | @fluidsealing

Founded in 2011, Empowering Pumps is the information and connection hub for the global pump industry. Their vision is to build a digital community through websites, eNewsletters, and social media channels that allows pump industry professionals to exchange ideas, news stories, product information, case studies, videos, event information and more.

Follow them at www.EmpoweringPumps.com | @EmpoweringPumps